Oil Cooler SPLITSCREEN Installation (touring models)

FITMENT: 2017-2023 Harley-Davidson Touring (FLHR, FLHRC, FLHRXS, FLHT, FLHX, FLHXS, FLHXST, FLTRX, FLTRXS and FLTRXST models) equipped with an Oil Cooler which looks like the images on this page. Exceptions: Does not fit models with Water Cooling:

The Oil Cooler SPLITSCREEN installation begins with removal of the oil cooler cover by grasping the bottom and “rotating” the oil cooler cover PINS away from and out of the rubber grommets. Re-installation is the opposite procedure as per:

Installing protective Oil Cooler SPLITSCREEN
STEP-ONE: OIL COOLER COVER REMOVAL (if rubber grommets “stick” to PINS – remove from PINS and replace)
Stock Oil Cooler Cover

NOTE: Stock oil cooler cover is shown. Installing the protective Oil Cooler SPLITSCREEN directly onto the oil cooler itself allows usage of either the stock oil cooler cover (left) or the Road Glide® Fairing Spoiler 57001042XXX (or similar)

Road Glide® Fairing Spoiler (57001042XXX)
R

Thoroughly clean the oil cooler area between the rubber grommets where the 3M double-sided adhesive tape (pre-installed on back of SPLITSCREEN) will stick.
After a “practice placement” to ensure proper alignments, remove 3M Tape protective film and affix SPLITSCREEN onto the oil cooler taking care to align screen slots/openings with cooler tabs/rubber grommets as per:

Installing protective Oil Cooler SPLITSCREEN
Color-Coded alignment for Installing protective Oil Cooler SPLITSCREEN (optional mVS Badge shown)

Re-install Oil Cooler Cover by hanging SLOTS onto Oil Cooler TABS and rotating PINS back into RUBBER GROMMETS. CONTRATULATIONS on a job well done……enjoy your Oil Cooler SPLITSCREEN protection! Assuming you are pleased with your purchase, we’d appreciate you leaving us a website review: Menu\Review\Write a Review

Oil Cooler SPLITSCREEN Additional Notes:

Installing protective Oil Cooler SPLITSCREEN

Elegant Solutions Inc. dba Motorcycle Vent Screens is not affiliated with Harley-Davidson®. Terms such as: Harley-Davidson®, Road Glide®, Batwing, Low Rider ST®, FXLRST® and Harley® are trademarks of the Harley-Davidson® Motor Company. They are only used here for descriptive, informational purposes and displayed either with the ® designation or in CAP’s (an alternate method of displaying the “®” designation). The 3-screen complete solution described herein is termed “Low Rider ST Vent Screens/SPLITSCREENS” and/or FXLRST Vent Screens/SPLITSCREENS. These are terms coined by Elegant Solutions Inc.